Optically tune industrial cells and make them safer. Only suitable for unprotected 20700/21700 batteries. (max. length 71 mm)

Choose your favourite design, shrink tubing cut to fit 77 mm for 20700/21700 cells.

Many battery suppliers for daily use such as Efest, Keeppower, Enerpower etc. already provide their own batteries with a durable PVC shrink sleeve to ensure safety in use. As industrial batteries are built for further processing, the protective sheathing of the cells is not sufficient for daily use.A damaged protective sheathing can quickly be the undoing of Li-Ion batteries. (Short circuit, fire, explosion etc.).

Replace damaged protective sheathing. Attach additional heat shrink tubing to increase safety (especially important for industrial cells). Replacement for already worn or torn down heat shrink tubing.

Pull the heat shrink tubing over the cell so that the cell is in the centre of the heat shrink tubing. Using a heat gun or a suitable warm air dryer, first shrink the tubing at the positive pole and then at the negative pole. When the tubing has shrunk at both poles and looks tight, the treatment is carried out on the outer surface of the cell.

Do not heat the shrink tubing and battery too much, because the shrink tubing starts to shrink at 80 °C already. Do not heat the cell for too long. Do not place the cell and shrink tubing in the oven or microwave. (Fire and explosion hazard)

Scope of delivery: 1x shrink tubing with the desired motif.