Keeppower 18350 – 900mAh, 3.7V Li-Ion Battery PCB Protected

5,56 €

Ready for shipping in 1–2 business days

Keeppower 18350 battery, 900 mAh at 3.7 V, protected with a raised button top. A Seiko PCB against shorts, overcharge and deep discharge for torches, LEDs and battery packs.

  • EAN: 6970906550098

High quality cell with long life and high cycle life.

Protection/PCB Seiko (Made in Japan) with short circuit, overcharge and deep discharge protection. Designed for areas of torches, LEDs, battery packs, etc.

Please note the dimensions of the cell before buying! Due to the built-in electronics, the cell is not suitable for every application!
Height and diameter are larger than a standard 18350 cell without PCB.

Please note that removing or damaging the protective electronics (PCB) may cause a short circuit, fire or explosion.

Lithium-ion batteries are thermally stable and are not subject to memory effect.
They work on the basis of lithium and are characterised by a high energy density.

Technical Data

CellDLG ICR18350
Capacity900mAh
Min. capacity850mAh
Nominal voltage3,7V
Charging end voltage4.2V ± 0.05V
Discharge voltage2,75V
Positive terminalraised (button top)
Max. Discharge current2C = 2A
ChemistryLiCoO2 (ICR)
Protective circuit PCBintegrated 5A
Charging methodCC-CV
Diameter18.45 mm ± 0.15 mm
Height38.20 mm ± 0.15 mm
Weight25.4 g ± 1 g
Comparison testSteam batteries
Normal charge current650mAh/3h
Charging operating temperature0 °C – 45 °C
Operating temperature discharging-20 – 60 °C

Notes:

A special charger is required for charging lithium ion batteries, which charges the batteries according to a special charging procedure. (CCCV = constant current, constant voltage.) The batteries must not be charged above a voltage of 4.2 volts, otherwise there is a risk of fire and explosion. It is advantageous to charge the batteries only up to approx. 4.1 volts, as this significantly increases the service life or the number of charging cycles (possibly up to double). Only lithium ion chargers may be used for charging. However, the cheap chargers sometimes have the disadvantage that they do not switch off safely at the end of the charging process, but continue to charge the batteries with a small charging current, which can be dangerous.

Furthermore, rechargeable batteries and batteries do not belong in household waste! Please dispose of them as prescribed by law at the municipal collection points or in the [usually green] containers provided by retailers.

General

BrandKeepPower
Application typeBattery Cell
ModelP1835C
ConditionNew
Manufacturer No.P1835C

Electrical

Voltage3.7 V
Capacity900 mAh
ChemistryLi-Ion
Max. discharging current2 A

Physical

Format / size18350
TerminalButton Top
Weight25 g

Features

RechargeableYes
Protection electronicsProtected

KeepPower

KeepPower produces protected and unprotected lithium-ion cells as well as chargers and accessories. Our range spans several round-cell formats and includes spacers, cables and heat-shrink tubing. Cells are supplied with or without protective circuitry, and the protection status is stated for each product.

Questions about this product? Reach us by email, WhatsApp, or the form below.

Regarding: Keeppower 18350 - 900mAh, 3.7V Li-Ion Battery PCB Protected (12007)
https://akkuify.de/en/product/keeppower-18350-900mah-3-7v-li-ion-battery-pcb-protected/

Reviews

There are no reviews yet.

Be the first to review “Keeppower 18350 – 900mAh, 3.7V Li-Ion Battery PCB Protected”

Your email address will not be published. Required fields are marked *

Similar items

Keeppower 18350 - 900mAh, 3.7V… 5,56 € no VAT (§19 UStG)