A further development and successor model of the very popular VC2 Plus Master from Xtar. The visually and technically upgraded charger has a newly designed and colour-optimised LCD screen.
The modern, tidy LCD screen provides the most important key figures such as battery type, charging current and voltage of the batteries at first glance. Status display of charged capacity, charging current and internal resistance of the batteries are displayed by pressing the soft key. Charging current of up to 2x 1A is automatically set by measuring the resistance and continuously optimised by the VCS2;
Charging of NIMH/NICd batteries and USB output (5V 1A) is a useful addition to the Xtar VCS2 charger.
The VC2S from Xtar is an intelligent fully automatic charger.
Automatic switch-off when the batteries are fully charged as well as independently functioning charging bays are standard of all XTAR chargers.
The following lithium-ion batteries can be charged with the Xtar VC2S.
Li-Ion: 10440 / 14500 / 14650 / 16340 / 17335 / 17500 / 17670 / 18350 / 18490 / 18500 / 18650 / 18700 / 22650 / 25500 / 26650 / 20700 / 21700
Charging of 32650 batteries not possible.
3.6V / 3.7V Li-ion / IMR / INR / ICR.
NIMH/NiCd: AAAA / AAA / AA / A / SC / C; Ni-MH / Ni-Cd.
XTAR VC2S Product Information:
- Charging of Li-Ion and NIMH batteries. Both charging bays work independently and allow charging of two different battery types.
- Charging current selection is automatic after checking the internal resistance. Max. charging current 2A on one slot or max. 1A per charging slot.
- Integrated USB output with power path management system allows you to charge both batteries and the external device simultaneously while the power supply is connected!
- Xtar VC2S charger has 2 Intelligent independently functioning charging bays.
- LCD display showing battery type, charging current and voltage for both battery bays independently.
- PowerBank function with battery status display to prevent deep discharge of the batteries.
- Automatic selection of charging method. TC-CC-CV for Li-Ion and pulse for NIMH batteries.
- XTAR Current Buffering Charging technology protects the batteries from high current fluctuations while charging
- 0V activation function to save over-discharged batteries
- The Xtar VC2S can be powered by any 5V USB adapter, recommended 5V 2.1A. (suitable adapter article no. 400609)
- Soft Start” function, avoids battery damage caused by power surge
- IC temperature monitoring, to avoid overheating
- Reverse polarity and short circuit protection
- Automatic charge stop, charging stops automatically when battery is full. Resumes charging when battery voltage is below 3.9V
- Three-stage charging algorithm
- Charging methods TC, CC CV
- Compact size
Further information:
Warnings:
Only charge the Li-ion batteries intended for use with the appliance. 2.
Only charge batteries with an appropriate charging voltage (risk of explosion). 3.
3. unit is for domestic use, keep away from water and moisture!
4. disassembly and modification are strictly prohibited!
5. please avoid short circuit.
Xtar VC2S charger, USB cable, manual English, German, Italian , French, Spanish Russian, Turkish, Polish.
Technical Data
| Input | 5.0V DC/2.1A |
| Charging currents | 2Ax1 / 1.0Ax2 / 0.5Ax2 |
| Termination (TC) at 0.5A | = 80mA |
| Final charge voltage Li-Ion | 4,2 ± 0,05V |
| End-of-charge voltage NIMH | 1,45 ± 0,1V |
| USB output | DC 5V 1A |
| USB output switch-off | 3.0V ± 0.2V |
| Operating temperature | 0 °C – 40 °C |
| Net weight | 115 g |
| Dimensions LxWxH in mm | 129 x 66,5 x 32 |
| Manufacturer | XTAR |
Notice:
The above parameters are laboratory tested. Approximate values may vary between charger, batteries and environment.
Reviews
There are no reviews yet.