Upgrade version of the XTAR VC2S. While retaining all the features of the VC2S, the VC2SL uses a USB-C input and can charge protected 21700 batteries.
The modern uncluttered LCD screen provides at a glance the most important key figures such as battery type, charging current and voltage of the batteries. Status indication of charged capacity, charge current and internal resistance of the batteries are displayed by pressing the soft button.
The VC2SL from Xtar is an intelligent, fully automatic charger.
Automatic shutdown when batteries are fully charged as well as independently functioning charging bays are standard of all XTAR chargers. Charging currents of up to 2x 1A are automatically set by measuring the resistance and continuously optimised by the VC2SL.
Charging of NIMH/NICd batteries as well as USB output (5V 1A) is a useful addition to Xtar VC2SL charger.
The following lithium-ion batteries can be charged with the Xtar VC2SL:
Li-Ion: 10440 / 14500 / 14650 / 16340 / 17335 / 17500 / 17670 / 18350 / 18490 / 18500 / 18650 / 18700 / 22650 / 25500 / 26650 / 20700 / 21700
Charging of 32650 batteries not possible.
3.6V / 3.7V Li-ion / IMR / INR / ICR.
NIMH/NiCd: AAAA / AAA / AA / A / SC / C; Ni-MH / Ni-Cd.
XTAR VC2SL Product Information:
- Charging of Li-Ion and NIMH batteries. Both charging bays work independently and allow charging of two different battery types.
- Charging current selection is automatic after checking the internal resistance max. charging current 2A on one bay or max. 1A per charging bay
- Integrated USB output with power path management system allows you to charge two batteries and the external device simultaneously while the power supply is connected!
- LCD display with battery type, charging current and voltage of the batteries independently.
- Power bank function with battery status display to prevent deep discharge of the batteries.
- Automatic selection of charging method. TC-CC-CV for Li-Ion and pulse for NIMH batteries.
- XTAR current buffering charging technology protects the batteries from high current fluctuations while charging
- 0V activation function to save over-discharged batteries
- The Xtar VC2SL can be powered by any 5V USB adapter, recommended 5V 2.1A. (suitable adapter article no. 400609)
- “Soft start” function, avoids battery damage caused by power surge
- IC temperature monitoring, to avoid overheating
- Reverse polarity and short circuit protection
- Automatic charge stop, charging stops automatically when battery is full. Resumes charging when battery voltage is below 3.9V
- Three-stage charging algorithm
- Charging methods TC, CC CV
- Compact size
Further information:
Warnings:
1. charge only the Li-ion batteries intended for the unit.
2. only charge batteries with suitable charging voltage (risk of explosion).
3. unit is for domestic use, keep water and moisture away!
4. disassembly and modification are strictly prohibited!
5. please avoid short circuit.
Scope of delivery:
Xtar VC2S charger, USB cable, manual English, German, Italian , French, Spanish, Russian, Turkish, Polish.
Technical Data
| Input | 5.0V DC/2.1A |
| Charging currents | 2Ax1 / 1.0Ax2 / 0.5Ax2 |
| Termination (TC) at 0.5A | = 80mA |
| Final charge voltage Li-Ion | 4,2 ± 0,05V |
| End-of-charge voltage NIMH | 1,45 ± 0,1V |
| USB output | DC 5V 1A |
| USB output switch-off | 3.0V ± 0.2V |
| Operating temperature | 0 °C – 40 °C |
| Net weight | 115 g |
| Dimensions LxWxH in mm | 137 x 66.5 x 32 |
| Manufacturer | XTAR |
Notice:
The above parameters are laboratory tested. Approximate values may vary between charger, batteries and environment.
Reviews
There are no reviews yet.